Exhibit,Appendix: Dan Albasry as Trustee of the Estate of Newal Al Saad, Firas Mohammad v. Barretts Minerals Inc., Beacon Cmp Corp., Brenntag North America Inc. (Individually And As Successor To Minerals And Pigment Solutions Inc., Successor To Whittaker, Clark & Daniels Inc.);, Brenntag Specialties Llc (Individually And As Successor To Minerals And Pigment Solutions Inc., Successor To Whittaker, Clark & Daniels Inc.);, Charles B. Chrystal Company Inc.;, Colgate Palmolive Co.;, Glaxosmithkline Consumer Healthcare Holdings (Us) Llc (Individually, D/B/A And As Successor To Yardley Of London, Yardley Of London Ltd., Yardley Of London (U.S.) Llc, Smithkline Beecham Plc And Beecham Group Llc);, Glaxosmithkline Llc (Individually, D/B/A And As Successor To Yardley Of London, Yardley Of London Ltd., Yardley Of London (U.S.) Llc, Smithkline Beecham Plc And Beecham Group Llc);, Gsk Consumer Health Inc. (Individually, D/B/A And As Successor To Yardley Of London, Yardley Of London Ltd., Yardley Of London (U.S.) Llc, Smithkline Beecham Plc And Beecham Group Llc);, Lornamead Inc. (Individually And As Successor To Lornamead Acquisitions Ltd. And Lornamead Brands Inc., D/B/A Yardley Of London A/K/A Yardley);, Pfizer Inc., Port Jervis Laboratories Inc. (F/K/A Kolmar Laboratories Inc.);, The Procter & Gamble Co. (Individually, D/B/A, And As Successor To Yardley Of London Ltd., Yardley Of London A/K/A Yardley, Yardley Of London Inc., And Yardley Of London (U.S.) Llc));, Whittaker, Clark & Daniels Inc. (Individually, D/B/A, And Successor To Charles Mathieu Inc. (D/B/A Charles Mathieu & Co. And Chas. Mathieu Inc.), American Talc Company Inc., Metropolitan Talc Company Inc., Imperial Products Co. Inc., And Resource Processo, Yardley Of London Inc. (F/K/A Lentheric Inc. And Lentheric Distributors Inc.);, Yardley Of London Ltd.,, Conopco Inc. (Individually, Doing Business As, And As Successor To Elizabeth Arden Inc. And Evyan Perfumes Inc., Parfums International And Idea Fragrances Co.)

• 
• 
• 
• 
• 
• 
• 
• 

						
                                
Preview
                                FILED: NEW YORK COUNTY CLERK 07/10/2023 10:29 PM         INDEX NO. 190002/2023
NYSCEF DOC. NO. 94                                 RECEIVED NYSCEF: 07/10/2023




                       EXHIBIT 9
_<< JNJ 000298009 >>
17e
PROCESS SPECIFICATION
- RESTRICTED :BABY




                                                                            INDEX NO. 190002/2023
SUBJECT: MANUFACTURE OF JOHNSON'S BABY POWDER AT.KOLNAR




                   FILED: NEW YORK COUNTY CLERK 07/10/2023 10:29 PM
APPLICABLE PRODUCT(S): Baby Powder Formula 227-88-02_
REVISION DATE
4/^1191
9/3/81
5/10/82
7/22/82
1/28/83
7/6/83.
9/20/83
2/7/84
08/02/84
07/16/85
.1.1, DESCRIPTION OF CHANGE
New process spec. 'zation terminating En/82.
Page 2, Section 2 TBD (Spec. No.) changed to 6-015.




                   NYSCEF DOC. NO. 94                                 RECEIVED NYSCEF: 07/10/2023
Termination date extended from 6/1/82 to 6/1/83.
. • ••• • trarASVW!
LOCATION:
.._. DLL,.
Rail car delivery added to Operating Procedure; Quantitative
Formula updated; Primary Blending Steps 2, 3 & 9 updated.
,
Process log sheets included in specification.
Termination date extended from 6/1/83 to 6/1/84.
Nod Code changed from 5 to 6 to reflect tamper evident
Tamper evident equipment included in specification.
Termination date extended from 6/1/84 to 6/1/85.
SPECIFICATION DISCONTINUED.
-
J&J-0040434
<< JNJ 000298010 >>
•
, •
coprerce CDCriCIPATTAM




                                                                            INDEX NO. 190002/2023
_ nrcroTrrrn BABY PRODUCTS COMPANY




                   FILED: NEW YORK COUNTY CLERK 07/10/2023 10:29 PM
P.UrISWI - nL II 31 ILL#
SUBJECT: MANUFACTURE OF JOHNSON'S BABY POWDER AT KOLMARTTh
APPLICABLE PRODUCT(S): Baby Powder Formula 227-8842- "
INTERIM(S) AFFECTED: 72193
REVISION DATE
4/21/81
9/..1/81
5/10/82
7/22/82
1/28/83
7/6/83
9/28/83
2/7/84
.
08/02/ 84




                   NYSCEF DOC. NO. 94                                 RECEIVED NYSCEF: 07/10/2023
.751.126 DESCRIPTION OF CHAN6E.
New process specification terminating 6/1/82.-:
Page 2, Section 2 TBD (Spec. No.) change.l.to 6-015
TPrminatinn datp extendpd frnm 6/1/R2 tn 6/1/83_
Rail car delivery added to Operating Procedure; Quantitative
Formula updated; Primary Blending Steps 2, 3 & 9 updated.
Process log sheets included in specification.
Termination date extended from 6/1/83 to 6/1/84.
Mod Code changed from 5 to 6 to reflect.tamper.evident
Tamper evident equipment included in specification.
Termination date extended from 6/1/84 to 6/1/85.
. rri
77.7.111U -r,
- • _ _
-
:-7LOCATION:7:77.:
:..„
!eiken
J&J-0040435
<< JNJ 000298011 >>
• •,•••;,s, • ••••-•.
aiR=M:SC
talOSA




                                                                                       INDEX NO. 190002/2023
t'itr;f6t50WWi




                   FILED: NEW YORK COUNTY CLERK 07/10/2023 10:29 PM
-
PROCESS SPECIFICATION BABY PRODUCTS COMPANY.
"
smarm MANUFACTURE OF JOHNSON'S BABY POWDER -AT 'COLMAR'
DESCRIPTION/OPERATING REQUIREMENTS & PROCEDURES
1. This process specification is to be used in blending,the'raw.materi-als:fdi
JOHNSON'S Baby Powder Formula 227-88-02 at Kolmar.Libs.,IPOrt
•
•
2. RAW MATERIALS R.M. Code
_ Spec: No.
Windsor 66 Talc 712-003-4 8006
Perfume Oil, Synfleur J-27-1 TBD 6-015
3. EQUIPMENT (PRIMARY SYSTEM)
A. Silo Delivery System




                   NYSCEF DOC. NO. 94                                            RECEIVED NYSCEF: 07/10/2023
a. Railcar unloading blower (75 HP)
b. NEPA filter for unloading blower
c. Unloading flexible hoses (air and product) .
d. Talc silo (60,000 lbs.)
e. Silo bin vent (2)
f. Aeration pads
g. Aeration blower with air filter (15 HP)
h. Rotary valve type 1614 (5 rpm; 8,000 lbs ./hr.)
i. Fuller kenyon pump (20 HP)
j. Talc supply blower (30 HP)
k. HEPA filter for supply blower
1. Sight glass from FKP
. .
m. High and low level sensors for silo
.
n. Aluminum piping for transfer of talc •
B. Blending System
a. Pre -blend talc weigh bin on load cells
b. Aeration pads
c. V -blender (2 HP) with intensifier bar
d. Talc weigh bin on load.cells
Iliarnt natit
. • • - '
.
-
f. Ribbon blender, 4000 lbs. (20 HP).
g. Product surge bin (10,000 lbs4
. T7
h.. Aeration pads..-:.
i. Rotary valve type 1410 (10 rpm; 17,000 lbs./hr.)
j. Rotek sifter with 4 -and 40.mesh screens:. 'H
k. Filler surge bin with high and low level sensors-
• 1. Dust collector • ..
• .••
•
. • : •
7112.1215 .„
J&J-0040436
<< JNJ 000298012 >>
BABY PRODUCTS COMPANY. '
PROCESS SPECIFICATION
SUBJECT: MANUFACTURE OF JOHNSON'S BABY POWDER AT KOLMAR




                                                                                               INDEX NO. 190002/2023
4. QUANTITATIVE FORMULA




                   FILED: NEW YORK COUNTY CLERK 07/10/2023 10:29 PM
Raw Material
Talc
Perfume Theoretical tqw
99.82
0.18
lUCI.1)0% 1:::;'4VAWIFAI',711
..-ttieF-Agy,,,Itrizts
............ ...„-:.„:„ ................, 4 1::::::::,......2.•,.._„,v.i.:,_.„.,",„ _
• •_.
- the
. 99.80
- vacuueconVeying;•
-; :20 - •:system)i...
100.00%
5. OPERATING PROCEDURE




                   NYSCEF DOC. NO. 94                                                    RECEIVED NYSCEF: 07/10/2023
A. Unloading of Trailers and Rail Cars
Step 1. Obtain copy of certificate of analysis.
Step 2. Check seals for integrity.
752.121 Step
Step 3. Pull analytical sample for color and moisture from top hatch.,
4. Pull microbial retain sample from top hatch.
NOTE: Aseptic techniques must be used. 4. Pull microbial retain sample from top hatch.
NOTE: Aseptic techniques must be used.
Step 5. If color and moisture samples are acceptable and C of A is in nan
accept trailer. • NOTE: Aseptic techniques must be used.
Step 6. Uncap both the air line and the plant air diScharge line and.Wi0e
with 70% IPA using sterile gauze. - - .
Step 7. Connect the air line to the plant air discharge .line and to the. truck.
air inlet line.
NOTE: Truck air inlet line must also be-..wiped.witti70%- IPA.USin
sterile gauze.
•
Step 8. Uncap the product line and the plant product 'receiving/line:OCW1
-_,•.•
both with 70% IPA and sterile gauze. • •
. . .
. . • •
Step 9. Connect the product line to theplant product.receiving4ineL6hd.also..-
•-
TO tne proauct oiscnarge 'mu or. -Erie trucK.
•
NOTE: Wipe truck.product
gauze.
•
•
•
Step 10. Open the air inlet valve, discharge line with .70%.,IPA and=sterile
• •
flow .cone air valves and prOduct.:-valir
v.
• .7.,
i0air#
J&J-0040437
<< JNJ 000298013 >>
PROCESS SPECIFICATION
SUBJECT: MANUFACTURE OF JOHNSON'S BABY POWDER AT KOLMAR
. •




                                                                                       INDEX NO. 190002/2023
. - .




                   FILED: NEW YORK COUNTY CLERK 07/10/2023 10:29 PM
Step II. lurn on oiower to pumvtaIc into.stio. Movement.ofAalc.:-willAe
verified by use of sight glass.
.
_
Step lz. When unloading is complete, close all valves and disconnect unloadinC
lines. Wipe all caps and connections with.70%1PA and.sterilegagzej:.7.
. _ _ •
before closing caps. Store hoses with caps in place untilmext
• UHIVOUMSo
• • • —
• B. Primary Blending. (Sea Ratch Log Sheets Attached) •
Blending at Kalmar will utilize a pre -blend type of batching. A 600 lbs.
pre -blend of talc and perfume will be made and blended in a V -type
After blending, it will be added to 3,400 lbs. of talc in a ribbon-blenderAO,
make the desired batch size and achieve the proper finished goods perfume




                   NYSCEF DOC. NO. 94                                            RECEIVED NYSCEF: 07/10/2023
content. , .•
Step 1. 1. Charge the pre -blend weigh bin with 600 lbs. of talc.
.
Step 2. Charge the volumetric perfume tank with perfume. (Tank must be.:
calibrated to reflect perfume content if necessary.).%,-
Step 3. After pre -blend weigh bin is full, charge talc-weight:bin viith3,40
- - -
lbs. of talc.
Step 4. Empty talc from pre -blend weigh bin into the V -blender:
Step 5. When pre -blend weigh bin is empty, close V -blender loading pok-an
• turn on V -blender.
Step 6. When V -blender is started, add perfume thru intensifier bar..
,
Step 7. When perfume is thoroughly mixed with talc, stop.V-blendei,
, : ••
•
Step 8. Begin discharging both the talc -and the pre -blend talc:iq.c-,the:,
•.. • •• • • • • • • ^ • s
riopon piender.ana,oegmmixing. -
Step 9. Blend until perfume is thoroughly dispersed throughoui' the 4000'lbs
of talc.•
• • *".
•
Steil 10. After mixing Is complete, take::a)perfume and deliver
. . . .
_ to: lab:.
Step
Step
1/02.1211 11. Discharge.baby.powder from ribbon blender-into:product-tsu
12. Baby powder will be held- In surge binuntil= a demand signal is
received from the filling line.
"
.
J&J-0040438
<< JNJ 000298014 >>
1535147faigtritiglir
PR
Step 13.




                                                                                     INDEX NO. 190002/2023
Step 14.




                   FILED: NEW YORK COUNTY CLERK 07/10/2023 10:29 PM
Step 15.
6. FINISHING UN
A. Equipment
a. Pneum
b. Pneum
C. Icore
d. Cap a
e. Pneum
f. Botta
g. UPC b
h. Label-
i. Fuji
j. Fuji
k. Semi-
1. Packi




                   NYSCEF DOC. NO. 94                                          RECEIVED NYSCEF: 07/10/2023
m. Case
n. Dust
B. Tamper Ev
a. Fuji
b. Tunne
c. Prehe
d. Prehe
e. Shrink
f. Label- - • Iler surge hopper will generate a -demand signal for%baby4low*
product surge bin. When the signal is received the-produc
bin will begin to deliver product.
-
.
will discharge from product surge bin.into.a.rotex-iifterand
o the filler surge hopper.
Flier surge hopper is full, powder flow will stop until
signal.
ale enline
. - , -
ale 616 -filler
heckweigher
. •
•
er sorters
. . •
. ...... .
ale cap and sifter capper
coder ---- . .. .
aheler Avery Co.
-
180/2114 Labeling System (for top and back labels)
BA -606R neck banding machine
tunnel model FIRD-1MOS-5/36-61S with spot heaters
ic packer loader
. .
.
ion
. .
. _
with hot melt • ' - • •
ion equipment
. ...
settings
.
or speed
t and airflow settings - TBD
ght, angle and distance - TBD
temperature.and.height
chine.settings - TBD
C. General Flow Bottles Through Finishing. Line
Step 1.
Step i.
Step 3.
V _
ties are received from storage and emptied on to the,enl. n
-
.
iner supplies the conveyor to the filler With bottie
• "• '
. :
are filled in the B16 -filler and discharged on to a conveyor.
•
•
4T71
J&J-0040439
<< JNJ 000298015 >>
P7 -05 -4,4e-
BABY PRODUCTS COMPANY
PROCESS SPECIFICATION




                                                                                            INDEX NO. 190002/2023
SUBJECT: MANUFACTURE OF JCHNSON'S BABY POWDER AT KOLMAR




                   FILED: NEW YORK COUNTY CLERK 07/10/2023 10:29 PM
711Z-1211 ."'"371••s4;a144kW.134!'22.74T7'.7,,:::
ENNI
Step 4. The bottles will then pass over the 'core 2000 cheCkweigher.....A1
light weights will be rejected on. to a rejection table:
Step 5. Bottles accepted by the checkweigher will continue down the
where a cap and, sifter will be secured to
Step 6. After capping, the bottles will be bottom date coded.
Step 7. From the bottom code dater, bottles will move to the Avery labeler--':
where a ores._ e sensitive label 1.: placed on the top of the cap.and
then a warning label is secured to the back of the bottle.
.
Step 8. After the UPC label is secured, the bottles will go throUgh the
.
Label -Aire machine where a pressure sensitive label is placed on the.
top top of the cap and then a warning label is secured to the back -of the.




                   NYSCEF DOC. NO. 94                                                 RECEIVED NYSCEF: 07/10/2023
bottle.
Step 9. A tamper evident shrink band is then applied to each bottle. The -
bottles with bands applied then go through the soot heaters-ands...,—
shrink tunnel where heat is applied. The heat causes the bands..6--
shrink.
Step 10. From the shrink tunnel, bottles will then be split into
fed into the semi -automatic packer..
Step 11. Filled packers will continue down a conveyor, placed in a :..ipPer and._
then through a case sealer. The outside of the shipper is.then date
rndod_
•N
Step 12. Upon leaving the sealer, the case is palletized.
•
D. On -Line Salvage of Capped or Uncapped Low Weight Containers
•
Procedure
•
Step 1. Remove cap (if necessary) from container to be filled and front
container that will serve as the source of powder.
Step 2. Pour powder from one container to the other In such a.mannei.,as'to.....-za
fill into the neck of the bottle and minimize
Step 3. After the bottle has been filled, at or -over the label weight, addr2
new sifter and cap.. . R.
-;.
. _
. •. - --•
4:77rtgz76RWOW,RIR-WWWWW011/201/Maidreataiati
:Prgarit,'"-Ait':PelcZ"t
- • • "
J&J-0040440
<< JNJ 000298016 >>
Shallcomply with JOHNSON & JOHNSON Baby Products Company "minimum.Requiremep**::.
_ . .
manuracturing uperations-, urr g/ -u;. BMW PRODUCTS COMPAtirf:—.




                                                                                          INDEX NO. 190002/2023
PUCESS SPECIFICATION




                   FILED: NEW YORK COUNTY CLERK 07/10/2023 10:29 PM
SUBJECT: MANUFACTURE OF JOHNSON'S BABY. POWDER AT KOLMAR,......
Safeguards
. .• - 7 • • . .
Stw 1. All personnel performing the powder addition shall
_ wear clean gloves_
and head covering. Care must be taken not to'touch the=pOwdeeltieing
poured on the inside of the container receiving the:powder.
Step 2. If any container falls on the floor while being filled -it-muSt-berC-1'
discarded.
Stiip 3. Short weighs,. -capped containers cr.::t be brought tvat-least:their'..
label weight and capped within 1 hour after powder is in open bottle-.
7. FINISHED MATERIAL PROPERTIES & REQUIREMENTS FOR MANUFACTURING
Per product specification 30-81.
8. BABY PRODUCTS COMPANY QUALITY ASSURANCE REQUIREMENTS FOR MANUFACTURING
7113.$211 .• : ;




                   NYSCEF DOC. NO. 94                                               RECEIVED NYSCEF: 07/10/2023
•
•
. C.
•
•
-
%WPM
J&J-0040441