Oregon Administrative Rules|Section 340-245-9050 - Colored Art Glass Manufacturing Facility Rules; Requirements That Apply To Tier 1 CAGMs

                                                
Current through Register Vol. 60, No. 12, December 1, 2021 
(1) No later than October 1, 2016, if located within the Portland AQMA, and April 1, 2017, if located outside the Portland AQMA, each Tier 1 CAGM must comply with subsection (a) or (b) for each glassmaking furnace or group of glassmaking furnaces that use raw material containing arsenic, cadmium, chromium, lead, manganese or nickel: 
(a) Install an emission control device that meets the emission control device requirements in OAR 340-245-9070; or
 
(b) Request a permit condition that prohibits the use of arsenic, cadmium, chromium, lead, manganese or nickel in the glassmaking furnace or group of glassmaking furnaces, and comply with that condition.
 
 
(2) No later than January 1, 2017, if located within the Portland AQMA, and April 1, 2017, if located outside the Portland AQMA, each Tier 1 CAGM must comply with subsection (a) or (b) for each glassmaking furnace or group of glassmaking furnaces that use raw material containing selenium: 
(a) Install an emission control device that meets the emission control device requirements in OAR 340-245-9070; or
 
(b) Request a permit condition that prohibits the use of selenium in the glassmaking furnace or group of glassmaking furnaces, and comply with that condition. 
NOTE: This rule was moved verbatim from OAR 340-244-9050 and renumbered and amended.
 
 
Or. Admin. R. 340-245-9050
DEQ 197-2018, adopt filed 11/16/2018, effective 11/16/2018
Statutory/Other Authority: ORS 468.020, 468A.025 & 468A.040
 
Statutes/Other Implemented: 468A.025 & 468A.040
This section was updated on 12/28/2018 by overlay.