New Jersey Administrative Code|Section 7:27-24.10 - Portable fuel containers and spill proof spouts: recordkeeping and reporting

                                                
 § 7:27-24.10. Portable fuel containers and spill proof spouts: recordkeeping and reporting 
 
(a) If the manufacturer of a spout, a portable fuel container, or a portable fuel container and spout uses a date-code on a product or its packaging, the manufacturer shall electronically register or re-register the product with the Department by following the procedure at 7:27-24.5(a)1 and 2, (b) and (c), and by following (b) through (e) below.
 
(b) The registration or re-registration shall include the following information:
 
1. The name of the manufacturer;
 
2. The full mailing address of the manufacturer;
 
3. The name and telephone number of a contact person;
 
4. Whether the product is a spout, portable fuel container, or portable fuel container and spout;
 
5. If the manufacturer is, for any product, complying with the requirements of this subchapter through one of the exemptions listed at 7:27-24.8(d), the following:
 
i. The name of the product;
 
ii. Whether the product is a spout, a portable fuel container, or a portable fuel container and spout; and
 
iii. The type of exemption;
 
6. An explanation of the date-code; and
 
7. An explanation of the representative code.
 
(c) The registration shall be submitted in accordance with the following schedule: 
 
1. For a spout, portable fuel container, or portable fuel container and spout sold in New Jersey and not previously registered, the registration shall be submitted no later than the later of March 29, 2009, or within 90 days of selling the product in New Jersey.
 
(d) Each manufacturer subject to registration shall re-register the product within 90 days after any change in coding of the date-code or representative code.
 
(e) If a manufacturer seeks approval to submit its registration or re-registration on paper, rather than electronically, the following apply:
 
1. The manufacturer shall submit the written request to the address given at 7:27-24.3(d), and the envelope in which the written request is submitted shall be labeled as follows: "Attention: Request for On-Paper Submittal of Portable Fuel Container Registration";
 
2. The written request shall include an explanation of the hardship that electronic submission would impose on the manufacturer; and
 
3. The Department shall not approve a manufacturer's written request to submit its registration on paper unless the Department is satisfied that electronic submission would impose hardship on the manufacturer.
 (New Rule, R.2004 d.182, effective May 3, 2004 (operative June 6, 2004). 
 See: 35 N.J.R. 4241(b), 36 N.J.R. 2218(a). 
 Amended by R.2008 d.366, effective December 1, 2008 (operative December 29, 2008). 
 See: 39 N.J.R. 4492(a), 40 N.J.R. 6769(a). 
 Deleted former (a) and (b); recodified former (c) as (a); in (a), inserted "of a spout, a portable fuel container, or a portable fuel container and spout", substituted "(b)" for "(d)" and "(e)" for "(g)"; recodified former (d) through (g) as (b) through (e); rewrote (c)1; and deleted (c)2.)